Rear Camber correction via the washer trick.


Do you have too much negative camber in the rear? If so you can fix it for pretty much free. This is pretty common knowledge, I know, but some people may not know. Plus I was taking the washers out of mine the other day so I figured I'd take a pic.

So all you have to do is put some washers between the body and where the UCA bolts to the body. Thats it. The bolts are pretty long but you shouldnt need to put very many washers in there. My car has about a 1 finger gap and I had 2 washers under each bolt and the camber was about -.5deg. Heres the pic:
read the red writing.

Home